
The material properties and steel sections an engineering calculation usually starts from, on one page: modulus of elasticity, shear modulus, yield and ultimate strength for common structural steels, stainless and tool steel, aluminium, magnesium, titanium, copper alloys and timber, and the area, second moments and radii of gyration of a range of W-shape beams. Switch between US and metric units, or type to narrow the list.
The same library is built into the calculators that need it: Beam Deflection and Column Buckling can fill their inputs from a material and a section, so nobody has to look up 29,000 ksi again. Each row says whether it is a specified minimum or a typical average, which matters: an average from a textbook is not a design value, so check a mill certificate or the governing code before relying on one.
| Material | E (ksi) | G (ksi) | Yield (ksi) | Ultimate (ksi) | Basis |
|---|---|---|---|---|---|
| Steel, ASTM A992 | 29,000 | 11,000 | 50 | 65 | minimum |
| Steel, ASTM A572 Grade 50 | 29,000 | 11,000 | 50 | 65 | minimum |
| Steel, ASTM A36 | 29,000 | 11,000 | 36 | 58 | minimum |
| Steel tube, ASTM A500 Grade C (rectangular) | 29,000 | 11,000 | 50 | 62 | minimum |
| Stainless steel 304 | 28,000 | 11,000 | 30 | 75 | average |
| Tool steel L2 | 29,000 | 11,000 | 102 | 116 | average |
| Aluminium 6061-T6 | 10,000 | 3,700 | 37 | 42 | average |
| Aluminium 2014-T6 | 10,600 | 3,900 | 60 | 68 | average |
| Magnesium AM1004-T61 | 6,480 | 2,500 | 22 | 40 | average |
| Titanium Ti-6Al-4V | 17,400 | 6,400 | 134 | 145 | average |
| Red brass C83400 | 14,600 | 5,400 | 11.4 | 35 | average |
| Bronze C86100 | 15,000 | 5,600 | 50 | 95 | average |
| Douglas fir (along the grain) | 1,900 | – | – | – | average |
| White spruce (along the grain) | 1,400 | – | – | – | average |
| Section | d (in) | bf (in) | A (in²) | Ix (in⁴) | Iy (in⁴) | rx (in) | ry (in) |
|---|---|---|---|---|---|---|---|
| W8×31 | 8 | 7.995 | 9.12 | 110 | 37.1 | 3.47 | 2.02 |
| W10×45 | 10.12 | 8.02 | 13.3 | 248 | 53.4 | 4.33 | 2 |
| W12×40 | 11.94 | 8.005 | 11.8 | 310 | 44.1 | 5.13 | 1.93 |
| W12×65 | 12.12 | 12 | 19.1 | 533 | 174 | 5.28 | 3.02 |
| W14×43 | 13.68 | 7.995 | 12.6 | 428 | 45.2 | 5.82 | 1.89 |
| W14×61 | 13.89 | 9.995 | 17.9 | 640 | 107 | 5.98 | 2.45 |
| W14×82 | 14.31 | 10.13 | 24 | 882 | 148 | 6.06 | 2.48 |
| W16×40 | 16.01 | 7 | 11.8 | 518 | 28.9 | 6.63 | 1.57 |
| W16×67 | 16.33 | 10.24 | 19.7 | 954 | 119 | 6.96 | 2.46 |
| W18×50 | 17.99 | 7.495 | 14.7 | 800 | 40 | 7.38 | 1.65 |
| W18×76 | 18.21 | 11.04 | 22.3 | 1,330 | 152 | 7.73 | 2.61 |
| W21×57 | 21.05 | 6.555 | 16.7 | 1,170 | 30.6 | 8.36 | 1.35 |
| W21×111 | 21.51 | 12.34 | 32.7 | 2,670 | 274 | 9.06 | 2.89 |
| W24×68 | 23.73 | 8.965 | 20.1 | 1,830 | 70.4 | 9.55 | 1.87 |
| W27×94 | 26.81 | 9.99 | 27.7 | 3,270 | 124 | 10.86 | 2.12 |
| W30×99 | 29.65 | 10.45 | 29.1 | 3,990 | 128 | 11.72 | 2.1 |
"Minimum" values are specified minimums for the grade (AISC, Modern Steel Construction, January 2004). "Average" values are typical figures from R. C. Hibbeler, Mechanics of Materials, 8th ed., and a real batch can be weaker. Check a certificate or the governing code before designing with them.
